-40%
Abrasive Technology1050196 TL1582 120grit PBS Brazed Diamond Bit
Abrasive Technology1050196 TL1582 120grit PBS Brazed Diamond Bit
Abrasive Technology1050196 TL1582 120grit PBS Brazed Diamond Bit
Abrasive Technology1050196 TL1582 120grit PBS Brazed Diamond Bit
Abrasive Technology1050196 TL1582 120grit PBS Brazed Diamond Bit
Abrasive Technology1050196 TL1582 120grit PBS Brazed Diamond Bit

Abrasive Technology1050196 TL1582 120grit PBS Brazed Diamond Bit

$ 29.04

Availability: 100 in stock
  • Abrasive Material: Diamond
  • MPN: 1050196 TL1582 120grit PBS
  • Grit (ANSI): 120
  • Return shipping will be paid by: Buyer
  • California Prop 65 Warning: California Proposition 65 Notice: This product contains chemicals known to the State of California to cause cancer, birth defects, and/or reproductive harm. Please see www.P65Warnings.ca.gov
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • Country/Region of Manufacture: Canada
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • Brand: Abrasive Technology
  • Condition: New

    Description

    This Abrasive Technology1050196 TL1582 120 grit PBS Brazed Diamond Bit new and comes in its original plastic sleeve.  It has a special designed head that is .575" wide and 1/2" high.  At the top and the bottom it has a 1/16" high by .575" wide brazed diamond rings that surround an indented brazed diamond body which measures 3/8" x 3/8".  The shank measures 1/2" in diameter x 2-1/2" high and has one flat ground in it to lock it in place.  Please see Pictures.
    This information came from the
    Abrasive Technology Catalog:
    P.B.S.® Braze Process The P.B.S.® bond is a unique, state-of-the-art diamond bonding system. With the P.B.S.® bond, diamonds are individually brazed in place. This process promotes high diamond exposure and virtually eliminates the loss of diamond particles through pull-out. Plus, with the P.B.S.® bond the abrasive section will not strip or peel. This translates into increased productivity and part consistency with an aggressive tool that is longer lasting, faster cutting, less loading, and cooler running. Our P.B.S.® grinding tools are excellent for machining tough-to-cut, non-metallic materials where fast stock removal and deep cutting is preferred.
    Low wheel speed is one of the major causes of poor performance in superabrasive grinding. Low speeds will cause loading and excessive heat build-up. We recommend that our products operate in the range of 5,000 to 12,000 SFPM. 9,000 SFPM is optimum. To prolong wheel life, use adequate coolant whenever possible.