APW F8-48 Infrared Restaurant Food Strip Warmer 120V 800W Rebuilt

Description

So I guess the switch died and the restaurant just wired it directly to the element. I had another switch so I replaced it. The switch is new. The cord was gross and since I was already wiring the switch I just replaced it and I used a heavy gauge cord with plenty of length. The cord isn't new but its in great shape. They cut the indicator lamp wire really short so I had to add wire to them, it still works great. I used proper wire, solder, the proper connectors, and heat shrink. Its been rebuilt properly and should last a long time. Two brackets are included but they are bent up. I put screws in all the screw holes and replaced stripped screws.
The switch breaks both the hot and the neutral. I used terminal connectors so if you want to wire it into a system it should be easy.
The unit is 48 inches overall and the exposed part of the heating element is about 41.5 inches.