Freud LU82M010 10" x 60T TCG Carbide Industrial Crosscut/Rip Blade

Description

Store Home
Shop By Brands
DeWalt
Milwaukee
Makita
Bosch
Hitachi
Bostitch
Porter Cable
All Products
About Us
Seller Feedback
Add to Favorite Sellers
The Freud LU82M010 includes:
1x Freud LU82M010 10" x 60T TCG Carbide Industrial Crosscut/Rip Blade
This multi-purpose blade will cut stacks of manmade wood products as well as hardwood and softwood up to 2-3/4" thick. The blade's deep gullets and TCG rip and crosscut through hardwoods and softwoods with ease. Although the ideal working range is 1/2" to 2-3/4" thick, thinner or thicker materials may be cut, resulting in some loss of surface finish. The Silver I.C.E. (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor. Technical Details Freud-Made TiCo Carbide is durable and chemical-resistant for long life and razor-sharp cuts Precision tensioning with computer-controlled equipment keeps the blade flat and true while maximizing blade life and performance Silver I.C.E. (Industrial Cooling Element) Coating is a revolutionary coating that resists corrosion and resin or "pitch" build-up and resists heat up to 2 times longer than standard polished blades. Features Ti-Co Hi-Density Carbide Chipboard Blend for maximum performance Anti-vibration design One Freud Industrial LU82M Heavy Duty Multipurpose Saw Blade Specifications
Highlights:
Premium TiCo HI-Density Carbide General Purpose Blend for Maximum Performance
Materials it can cut: Laminates, Chip Board, Melamine, Plywood, Composition Material, Hardwood and Softwood
Thick micrograin carbide tips
Laser cut blade bodies and expansion slots
5/8" arbor
.126kerf, .087 plate
10° hook angle
Tech Specs
Material Cut: Wood
Kerf (in): 0.126
Tooth Configuration: Triple Chip Grind (TCG)
Tooth Count: 60
Saw Blade Type: Table Saw
Maximum RPM: 7000
Arbor Hole Size: 5/8 in
Blade Diameter (in): 10
Blade Tooth Material: Carbide
Plate Thickness (in): 0.087
Accessory Type: Circular Saw
Progressive Blade Tooth Spacing: No
Grind Type: Triple Chip Grind
13/16 inch Diamond Arbor Knockout: No
UPC: 008925300762
globalTradeItemNumber (GTIN): 00008925300762
Non-Stick Coating: Yes
Set / Individual: Individual
Product Type: Circular Saw Blade
Net Tool Weight (lbs): 1.82
Notes:
WARNINGS:
This product may or may not cause Cancer and Reproductive Harm.
www.P65Warnings.ca.gov
About Our Products
ALL products listed are under the authorization & permission of the manufacturers who make them.
We do not break up combo kits to sell the component
We buy direct from the manufacturers, no middlemen
Our Items:
BRAND NEW unless they are clearly marked as "reconditioned"
Reconditioned tools are refurbished by the manufacturer ONLY
Come in their original packaging (NIB)
Are warranted through the manufacturer as we are an authorized retailer
Feedback
Tools Plus has been in business for 35+ years and we are
dedicated to providing you the highest level of quality service
.
Before leaving
anything but Excellent feedback
, please contact us first so that we may offer a resolution
that ensures
that you are 100% satisfied with your purchase.
Contact us:
Click on the: "ask a seller a question" link on the listing page.
If you would like us to call you, please send your question along with your name, contact number and the best time to reach you.
(Please note: feedback is left once received)
Shipping
We currently only offer ground shipping within the contiguous 48 states.
We
do not
ship to:
Alaska or Hawaii
US Protectorates (Guam, Puerto Rico, US Virgin Islands and American Samoa)
P.O. Boxes or APO/FPO
Shipping and processing times are estimated and do not include weekends.
No local pickup offered. Surcharges may apply based on delivery location. Orders over 0 will require delivery signature.
An important note regarding Heavy or Bulky items
Free Shipping applies to a commercial destination with a loading dock. Non-Commercial (ex: residential etc.) destinations "might" necessitate the need for a Lift gate or other additional expenses. These additional expenses are extra cost and you will be contacted for your approval of these extra expenses. At this time you can cancel your purchase without penalty. You can always ask questions in advance using the Ask a Question feature on this page.
The exception is on Jet, Powermatic, Wilton, and most Generac products where both lift gate charges and delivery to residential addresses
ARE
included in the price listed.
An Important note regarding pre-opened packages we ship
In order to ensure your item arrives in the best condition possible and to avoid any possible shipping damage, some products may be opened by us before being shipped out to you in order to add extra packing material. We open it only to assure your order arrives in the same condition as it was when shipped to us. Your product's safety and Your Satisfaction is our priority!
Product Images
Images in our listing are indicative of the product and may vary slightly. On occasion, the manufacturer will make running changes to the product. If this occurs and you receive an item that you are not satisfied with, please contact us before leaving any negative feedback.
Accessories are NOT included unless specified in the listing. We don't build anything. So please don't hold against us: color variations nor changes in the products country of origin.
Availability
Tools Plus sells through numerous outlets, therefore, items may become unavailable unexpectedly. In such an event, at our discretion, we will either offer to back order or cancel your purchase.
Before Buying
Please contact us with ANY questions regarding items specifics, details, and quantity.
We answer most questions from buyers within one business day (exceptions: weekends and holidays).
If it is known that UPS and/or USPS does not deliver to the address provided at checkout, please contact us BEFORE buying this item to avoid additional fees for delivery.
Returns
Tools Plus is committed to providing a great customer experience with an easy return process. Tools Plus offers FREE 30-Day returns on all items that are unused, in the original packaging and includes all accessories/manuals.
When you put in a return request, Tools Plus will provide you with a Return Merchandise Authorization. Items past the 30-Day return window that have defects due to faulty materials or workmanship and are within the manufacturer’s warranty coverage (please see your owner’s manual for specifics) can be sent to the manufacturer’s service center directly.
You will receive a full refund of the purchase amount after we receive the item back at our warehouse and the return has been processed, provided that the item has not been used, opened, repackaged, missing pieces or defaced. If the item does not return to us in its original condition we shipped it in, you may subject to a partial refund instead of a full refund.
Please note that returns may take up to 48 hours to process upon receipt from carrier.