MKS PBMS2A Portable Baratron Measurement System PN: PBMS2A0111B82, 1 & 10 Torr

Description

MKS PBMS2A 2-Channel Portable Baratron Measurement System
Comes with a manual and what you see in the pictures. If you don't see it, you probably wont get it.
Specifications are from MKS and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
2 units available, only 1 sold in the auction. These units were Intel surplus and are guaranteed to be in working condition. This unit is supposed to have two reference standards, however only 1 is included. The main unit was last calibrated on Jan., 17th, 07 and the calibration expired Jan., 18th, 07. The software version displayed upon power up is V01.38.
List Price is:
Approx. ,000.00 from MKS NEW
The Main Unit's Serial Number Tag Reads:
Model Number:
PBMS2A0111BU2
Serial Number:
000620341
The Standard's Serial Number Tag Reads:
Model Number:
627B01TBC1B
Serial Number:
000646452
Configuration by Model Number:
PBS2A:
Main Unit
01:
Manometer Range 1: 1 mmHg
11:
Manometer Range 2: 10 mmHg
B:
Fittings: Swagelok 8 VCR female
U:
Input Power: Standard USA & Canada Input power 110 VAC, 60 Hz
2:
Interface: RS-232
Features and Benefits:
Provides for in situ verification of process gauge accuracy and tool-to-tool consistency
Reduces downtime caused by removing the process gauge for calibration
Eliminates the unnecessary replacement of properly functioning instruments
Provides a diagnostic tool for troubleshooting
Select from 8 ranges: 0.02 to 1000 Torr full scale
Temperature controlled Type 627B Baratron Capacitance Manometer provides stable measurements at 0.12% to 0.25% of Reading accuracy
Inconel and stainless steel wetted surfaces permit use with many corrosive gases
Second channel may be used for another standard manometer or may be used to monitor the device under test
Components are packaged in a convenient wheeled caddy which is readily moved about the production facility
No warm up delays: an uninterruptable power supply maintains power to the manometer for 1 hour during transit
The transducer is traceable to NIST which assists in compliance with government and industry regulations such as ISO9000
Components are CE compliant
Description:
Designed with the cleanroom in mind, the PBMS2A is a portable two-channel pressure standard that is designed for in situ applications. Equally at home on the bench as on the production floor, the unit may be used for any pressure measurement application in the range of 10
-4
to 1000 Torr.
The system includes one or two Type 627B Baratron capacitance manometers (only 1 is included), a Type PR4000 display and an uninterruptable power supply all housed in a rugged wheeled caddy with an extendible handle for easy towing. The caddy also includes an integral tilt stand which, when extended, places the unit at an angle of 15 degrees from the vertical, thereby improving visibility of the display when the unit is on the floor.
Specifications:
Reference Manometer:
MKS Type 627B Absolute Sensor (NIST traceable), see 600 Series Selection Guide for other specifications
Baratron Transducer Accuracy (Non-linearity, Hysteresis, and Non-Repeatability):
Standard: ±0.12% of Reading (all ranges except 0.15% for 0.05 and 0.1 Torr, ±0.25% for 0.02 Torr)
Resolution (of F.S.):
1 x 10
-4
Fittings:
1/2" tubulation, 8 VCR, female
Operating Temperature Range:
15° to 40°C
Readout Electronics:
MKS Type PR4000, 4 1/2-digit LCD
Power Required:
110 VAC, 60 Hz
Warm-up Time/Start Time:
4 hours. However, use of the internal 280 VA UPS will keep the Transfer Standard warmed up and ready for immediate use for at least 60 minutes.
Configuration:
Removable Transfer Standard (10 ft./3 m cable)
Enclosure:
Metal wheeled caddy with extendible handle and tilt stand.
Dimensions:
13.38" W x 17.24" D x 20.97" H, 42.22" H with Handle extended (339.85 mm x 437.89 mm x 532.63 mm, 1072.38 mm)
Weight:
75 lbs. (34 kg.)
For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a .00 minimum for packaging, handling, and order processing. International shipping to be determined by destination.
Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.:
(1) Are you the end-user of this item?
(2) If you are not the ultimate end-user of the item, please state the ultimate end user's name.
(3) What is the ultimate country destination?
04/23/09