True Refrigeration TUC-48G-ADA-HC~FGD01 EA

Description

Made of stainless steel, the exterior front, top, and ends of the True TUC-48G-ADA-HC~FGD01 undercounter refrigerator are sturdy, while corrosion-resistant GalFan coats the steel back. The entire cabinet structure is insulated by high-density polyurethane, retaining cold air and enhancing structural strength. To streamline cleaning, its interior has a stainless steel floor with coved corners and a clear-coated aluminum liner that is effortless to wipe down. This unit's self-closing, positive-seal doors swing within the dimensions of its cabinet, and an extruded handle is integrated into each door.
Compliant with ADA guidelines, the True TUC-48G-ADA-HC~FGD01 undercounter refrigerator has a 34-inch work surface height and 3-inch-diameter stem castors. The evaporator's epoxy coating eliminates the potential of corrosion, and cleaning is simplified with one-piece, magnetic door gaskets that are removable without tools. This unit has low-e, double pane thermal glass doors with extruded aluminum frames.
The compressor’s fan motor directs air in reverse for a 20-second period at the start of each cycle. This blows away any dirt or buildup that’s settled on the coil. When employed in tandem with preventive maintenance, this feature helps improve efficiency and lengthen the unit’s lifespan.
Product Details
ADA-compliant, 34-in. work surface height
4 PVC-coated wire shelves are adjustable in
1
⁄
2
-in. increments
Stainless steel exterior constructs front, top, and ends with corrosion-resistant GalFan coating on steel back
Polyurethane insulation is foamed in place for cold-air retention
Interior contains stainless steel floor with coved corners and attractive, clear-coated aluminum liner
3-in.-diameter stem castors
Magnetic, 1-piece door gaskets are removable without tools
Double-pane, thermal glass assembly in the doors shows off stored items without letting cold air
Self-closing, positive-seal doors swing within dimensions of cabinet
Extruded aluminum door handles
Refrigeration System
Condenser fan motors and electronically commutated evaporator move air at a consistent volume, which produces little heat and reduces energy consumption
20-second fan reversal blows dust off condensing coil each cycle
Product temperatures are maintained by guided airflow through oversized, factory-balanced refrigeration system
Condenser has a slide-out design for convenient access from the cabinet's rear
Temperature holding range: 33-38 degrees F
Uses R290 hydrocarbon refrigerant
Evaporator's epoxy coating eliminates potential of corrosion
Dimensions & Utilities
Shelves: 21
9
⁄
16
in. W x 16 in. D
Overall: 48
3
⁄
8
in. W x 31
1
⁄
8
in. D x 33
11
⁄
16
in. H
3 A,
1
⁄
5
HP
115 V/60 Hz/1 ph, 7-ft. cord with a NEMA 5-15P plug
ADA Compliant Undercounter Refrigerator, 33-38° F, framed glass door version, stainless steel top & sides, (2) Low-E glass doors, (4) shelves, aluminum interior with stainless steel floor, 3" castors, LED interior lighting, front breathing, 1/5 HP, 115v/60/1, 3.0 amps, reverse condensing fan motor, 7' cord, NEMA 5-15P, 34" working height, cULus, UL EPH Classified, CE, MADE IN USA The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.