-40%
VP-2F Motor Kit TJERNLUND 950-2020

VP-2F Motor Kit TJERNLUND 950-2020

$ 75.76

Availability: 100 in stock
  • Restocking Fee: No
  • Condition: New
  • All returns accepted: Returns Accepted
  • MPN: 950-2020
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Return shipping will be paid by: Buyer
  • Brand: TJERNLUND
  • Item must be returned within: 30 Days

    Description

    MOTOR KIT FOR VP-2 880-0250
    VP-2F Motor Kit for VP-2 880-0250.
    The motor kit VP-2F is a replacement for the original VP-2. Good for 950-2020 Hp with TJERNLUND 880-0250 engine.
    The VP-2F prop motor kit is the replacement from TJERNLUND for the VP-2 880. It is a two-piece propeller Prop with a diameter of 6'' and a pitch of 6.7''. It has a ball bearing motor shaft that is 4 1/2'' long. The pinion gear in the motor shaft that drives the propeller has 32 teeth and a bore with a diameter of 5/32''. This kit is compatible with the E:Tec 2-Stroke (260441 - 262586).
    VP-2F Motor Kit TJERNLUND 950-2020 Includes one motor, propeller, drive belt, and thrust bearings.
    This VP-2F Motor Kit has been designed to work with the TJERNLUND VP-2, but will also fit many other boats and vessels. The kit includes everything you need to change the motor from a manual to an electric motor. If you already own a VP-2, it is not necessary for you to buy a new one, only the motor itself.
    The VP-2F motor kit is a complete solution with everything you need to turn your TJERNLUND VP-2 into a cool and powerful tool. The kit's 950 watt motor will easily shred all of your leaves, twigs, grass clippings, and more in seconds. No stopping, just continuous shredding with the convenient cord retention system. The kit includes our time tested VP230 rotor with four razor sharp blades for maximum shredding performance. For safety the motor features a thermal overload protection switch that cuts off the power if it overheats from too much debris or too long of a run time.
    Our VP-2F motor kit gives you everything you need to convert your treadmill into an elliptical trainer. Easy to install, the motor fits on the right side of the treadmill deck. Conversion kit includes: Motor assembly; AC power supply with cables and plugs; On/Off push button switch and cable; Torque limiter for locking the incline motion (VP-1 series); and Belt guide pulley assembly. Fits the following models:
    On Feb-02-21 at 01:33:59 PST, seller added the following information: